Install XXAME3 Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310

A new firmware is available for download for Samsung Galaxy Young GT-S6310. Samsung recently rolling out the XXAME3 Android 4.1.2 Jelly Bean official Firmware for Galaxy Young S6310. If your not with any carrier branded Galaxy Young S6310 then you can install the firmware on your device. The official Samsung KIES utility is currently not available to install the update on your device, so you have to go for an OTA update if you received the notification but if you not yet received any OTA notification then follow our simple step by step tutorial to manually update your Galaxy Young S6310 with the latest XXAME3 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Young S6310 because to install this firmware we will use ODIN utility. After installing official firmware XXAME3 Android 4.1.2 Jelly Bean you can always root your Galaxy Young S6310 with the help of proper rooting method.

Continue reading this page to install XXAME3 Android 4.1.2 Jelly Bean official firmware update in Galaxy Young S6310 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAME3 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Young S6310 to XXAME3 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy Young S6310

Android 4.1.2 Jelly Bean XXAME3 Firmware Details:

PDA: S6310XXAME3
CSC: S6310ORLAME1
Version: 4.1.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Young S6310. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Young S6310 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Young S6310 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAME3 Android 4.1.2 Jelly Bean official firmware update on Galaxy Young S6310.

Pages: 1 2

Install DXAMC7 Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310

Samsung Galaxy Young GT-S6310 received another official firmware update. Samsung is rolling out the DXAMC7 Android 4.1.2 Jelly Bean official Firmware for Galaxy Young S6310 in Singapore. The official Samsung KIES utility is currently not available to install the update on your device. You can go for an OTA update if you received the notification but if you not yet received any OTA notification then follow our simple step by step tutorial to manually update your Galaxy Young S6310 with the latest DXAMC7 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Young S6310 because to install this firmware we will use ODIN utility. After installing official firmware DXAMC7 Android 4.1.2 Jelly Bean you can always root your Galaxy Young S6310 with the help of proper rooting method.

Continue reading this page to install DXAMC7 Android 4.1.2 Jelly Bean official firmware update in Galaxy Young S6310 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest DXAMC7 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Young S6310 to DXAMC7 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy Young S6310

Android 4.1.2 Jelly Bean DXAMC7 Firmware Details:

PDA: S6310DXAMC7
CSC: S6310OLBAMD1
Version: 4.1.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Young S6310. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Young S6310 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Young S6310 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install DXAMC7 Android 4.1.2 Jelly Bean official firmware update on Galaxy Young S6310.

Pages: 1 2

Install XXAMC5 Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310

New Official firmware update news for Samsung Galaxy Young GT-S6310. Samsung is rolling out the XXAMC5 Android 4.1.2 Jelly Bean Firmware, and the news is- this latest firmware update is available for Galaxy Young S6310. Many of Galaxy Young S6310 users living in the supported countries including Croatia already received the update through OTA. The official Samsung KIES utility is currently not available to install the update on your device. You can go for an OTA update if you received the notification but if you not yet received any OTA notification then follow our simple step by step tutorial to manually update your Galaxy Young S6310 with the latest XXAMC5 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Young S6310 because to install this firmware we will use ODIN utility. After installing official firmware XXAMC5 Android 4.1.2 Jelly Bean you can always root your Galaxy Young S6310 with the help of proper rooting method.

Continue reading this page to install XXAMC5 Android 4.1.2 Jelly Bean official firmware update in Galaxy Young S6310 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMC5 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Young S6310 to XXAMC5 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy Young S6310

Android 4.1.2 Jelly Bean XXAMC5 Firmware Details:

PDA: S6310XXAMC5
CSC: S6310OXXAMD1
Version: 4.1.2
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Young S6310. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Young S6310 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Young S6310 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMC5 Android 4.1.2 Jelly Bean official firmware update on Galaxy Young S6310.

Pages: 1 2

Install XXAMC4 Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310

Official firmware update news for Samsung Galaxy Young GT-S6310. Samsung is rolling out the XXAMC4 Android 4.1.2 Jelly Bean Firmware, and the news is- this latest firmware update is available for Galaxy Young S6310. Currently the firmware is out for the users living in Greece, Portugal, South East Europe, Spain. You can use the official Samsung KIES utility to install the update in supported countries. Also you can go for an OTA update if you received the notification but if you not yet received any OTA notification then follow our simple step by step tutorial to manually update your Galaxy Young S6310 with the latest XXAMC4 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Young S6310 because to install this firmware we will use ODIN utility. After installing official firmware XXAMC4 Android 4.1.2 Jelly Bean you can always root your Galaxy Young S6310 with the help of proper rooting method.

Continue reading this page to install XXAMC4 Android 4.1.2 Jelly Bean official firmware update in Galaxy Young S6310 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMC4 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Young S6310 to XXAMC4 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy Young S6310

Android 4.1.2 Jelly Bean XXAMC4 Firmware Details:

PDA: S6310XXAMC4
CSC: S6310OXXAMC4
Version: 4.1.2
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Young S6310. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Young S6310 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Young S6310 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMC4 Android 4.1.2 Jelly Bean official firmware update on Galaxy Young S6310.

Pages: 1 2