CM10.1 RC5 Android 4.2.2 Jelly Bean Custom Firmware for AT&T Galaxy S2 I727

Android 4.2.2 Jelly Bean based CM10.1 RC5 ROM is now available for AT&T Samsung Galaxy S2 SGH-I727 (a.k.a- Galaxy S2 Skyrocket). However, this is not an official Jelly Bean firmware by the Google or Samsung but an after market custom firmware build by one of the most popular custom firmware maker CyanogenMod. The CyanogenMod Team recently released the latest RC5 of CM10.1 custom firmware which is based on the latest Android 4.2.2 Jelly Bean operating System and the download is available for Galaxy S2 I727. CyanogenMod Custom ROM’s are based on Android Open Source Project (AOSP) with many contribution by many developer within the Android Community, which designed to deliver better performance and reliability than stock Android. CyanogenMod RC builds are almost stable version and safe for regular use. So, if you willing to try out the latest Android 4.2.2 Jelly Bean based CM10.1 RC5 ROM on your Galaxy S2 I727 then follow below written guide as it is.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

CM10.1 Custom ROM

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I727. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I727 Latest USB Drivers

Since you will need to connect your phone to your PC, so you will need to have your Galaxy S2 I727 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based CM10.1 RC5 custom ROM on Galaxy S2 I727.

Pages: 1 2

Update AT&T Galaxy S2 I777 via CM10.1 (Nightly) Android 4.2.2 Jelly Bean Custom Firmware

AT&T Samsung Galaxy S2 SGH-I777 can now be updated with the latest Android 4.2.2 Jelly Bean based CM10.1 ROM. However, this is not an official Android 4.2.2 Jelly Bean firmware for AT&T Galaxy S2 but an after market custom firmware build by one of the most popular custom ROM maker CyanogenMod. The Latest Nightly Build of CM10.1 ROM which is based on the Android 4.2.2 Jelly Bean is now ready to download for Galaxy S2 I777. CyanogenMod Custom ROM’s are based on Android Open Source Project (AOSP) with many contribution by many developer within the Android Community, which designed to deliver better performance and reliability than stock Android. CyanogenMod Nightly builds are not stable version but safe for regular use. So, if you willing to try out the latest Android 4.2.2 Jelly Bean based CM10.1 Nightly Build ROM on your Galaxy S2 I777 then follow below written guide as it is.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

CM10.1 Custom ROM

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I777. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I777 Latest USB Drivers

Since you will need to connect your phone to your PC, so you will need to have your Galaxy S2 I777 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based CM10.1 Nightly Build custom ROM on Galaxy S2 I777.

Pages: 1 2

Install UCMD8 Android 4.1.2 Jelly Bean Official Firmware on AT&T Galaxy S2 I777

AT&T Users in USA those who own Samsung Galaxy S2 SGH-I777 can now update their device with the UCMD8 Android 4.1.2 Jelly Bean Official Firmware.  Samsung recently rolling out an OTA update about the UCMD8 Android 4.1.2 Jelly Bean official firmware update for Galaxy S2 I777 in USA. The official Samsung KIES utility is currently not available to install the firmware on your device. You can go for an OTA update if you received the update notification. But, In case, if official OTA update notification is not yet received to update your Galaxy S2 I777 to UCMD8 Android 4.1.2 Jelly Bean firmware then follow our simple tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S2 I777 because to install this firmware we will use ODIN utility. After installing official firmware UCMD8 Android 4.1.2 Jelly Bean you can always root your Galaxy S2 I777 with the help of proper rooting method.

Continue reading this page to install UCMD8 Android 4.1.2 Jelly Bean official firmware update in Galaxy S2 I777 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest UCMD8 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S2 I777 to UCMD8 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy S2 SGH-I777

Android 4.1.2 Jelly Bean UCMD8 Firmware Details:

PDA: I777UCMD8
CSC: I777ATTMD8
Version: 4.1.2
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I777. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I777 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 I777 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install UCMD8 Android 4.1.2 Jelly Bean official firmware update on Galaxy S2 I777.

Pages: 1 2

How to Update Android 4.2.2 SlimBean Build 6 Custom Firmware on AT&T Galaxy S4 I337

Android 4.2.2 Jelly Bean based Slim Bean Build 6 ROM is  now available for AT&T Samsung Galaxy S4 SGH-I337. However, this is not an official firmware by the manufacturer for Galaxy S4 I337 but an after market custom firmware made by one of the popular Custom ROM maker SlimBean.  Although the device already preloaded with the latest Android 4.2.2 Jelly Bean official firmware but you can enjoy many customization over stock firmware with this SlimBean Build 6 custom ROM. Slim Bean ROM’s are very lightweight, fast and smooth and installation is very simple just like other custom firmware. Team SlimBean recently released the Slim Bean Build 6 which is based on the latest Android 4.2.2 Jelly Bean and is all set for Galaxy S4 I337. The latest build is well optimized and bug fixes than previous build and introduce many new and exiting features. You can check complete features and changes of Slim Bean Build 6 later on this tutorial. So, If you willing to try out fast and compressed custom ROM Slim Bean 4.2.2 Build 6 on your Galaxy S4 I337 then read through this page to know the step-by-step procedure.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

Slim Bean Custom ROM

Slim Bean Build 6 Key Features and Changes:

  • Add DC-HSPA+ to framework
  • Fixed GlowPad layout on Larger devices
  • Massive improvements to T9 dialer
  • TRDS 2.0 [Updated Packages + Gapps]
  • Added Power Dis/Connect Notification sound options
  • Added TruView [Camera]
  • Massive updates to DashClock [Beta2]
  • Fixed Torch FC
  • Added Multi-Part/Split SMS option [Mms]
  • Added Transparent Incoming call [phone]
  • Added Auto-Brightness sensitivity
  • Changed keyboard hints to full holo blue light [LatinIME]
  • Fixed BT MAP requests
  • More optimizations and fixes for memleaks for Slim changes
  • And some more optimizations to Dalvik!
  • Fixed NFC bugs
  • Fixed TRDS on car dock

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S4 I337. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S4 I337 Latest USB Drivers

Since you will need to connect your phone to your PC, so you will need to have your Galaxy S4 I337 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based Slim Bean Build 6 custom ROM on Galaxy S4 I337.

Pages: 1 2

Update AT&T Galaxy S2 I777 via Android 4.2.2 SlimBean Build 6 Custom Firmware

Android 4.2.2 Jelly Bean based Slim Bean Build 6 ROM is now available for AT&T Samsung Galaxy S2 SGH-I777 Smartphone. However, this is not an official firmware by the manufacturer for Galaxy S2 I777 but an after market custom firmware by one of the popular Custom ROM maker SlimBean. There is no news about Android 4.2.2 Jelly Bean official firmware update for Galaxy S2 I777 but you can enjoy the latest Android 4.2.2 Jelly Bean features any time  on your device through custom ROM like Slim Bean. SlimBean ROM’s are very lightweight, fast and smooth and installation is very simple just like other custom firmware. Team SlimBean recently released the Slim Bean Build 6 which is based on the latest Android 4.2.2 Jelly Bean and is all set for Galaxy S2 I777. The latest build is well optimized and bug fixes than previous build and introduce many new and exiting features. You can check complete features and changes of Slim Bean Build 6 later on this tutorial. So, If you willing to try out fast and compressed custom ROM Slim Bean 4.2.2 Build 6 on your Galaxy S2 I777 then read through this page to know the step-by-step procedure.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

Slim Bean Custom ROM

Slim Bean Build 6 Key Features and Changes:

  • Add DC-HSPA+ to framework
  • Fixed GlowPad layout on Larger devices
  • Massive improvements to T9 dialer
  • TRDS 2.0 [Updated Packages + Gapps]
  • Added Power Dis/Connect Notification sound options
  • Added TruView [Camera]
  • Massive updates to DashClock [Beta2]
  • Fixed Torch FC
  • Added Multi-Part/Split SMS option [Mms]
  • Added Transparent Incoming call [Phone]
  • Added Auto-Brightness sensitivity
  • Changed keyboard hints to full holo blue light [LatinIME]
  • Fixed BT MAP requests
  • More optimizations and fixes for memleaks for Slim changes
  • And some more optimizations to Dalvik!
  • Fixed NFC bugs
  • Fixed TRDS on car dock

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I777. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the smartphone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android smartphones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I777 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 I777 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based Slim Bean Build 6 custom ROM on Galaxy S2 I777.

Pages: 1 2

How to Install Android 4.2.2 SlimBean Build 6 Custom Firmware on AT&T Galaxy S2 I727

AT&T Samsung Galaxy S2 SGH-I727 (Skyrocket) Smartphone users can now update their device with the latest Android 4.2.2 Jelly Bean based Slim Bean Build 6 ROM. However, this is not an official firmware by the manufacturer for Galaxy S2 I727 but an after market custom firmware by one of the popular Custom ROM maker SlimBean. There is no news about Android 4.2.2 Jelly Bean official firmware update for Galaxy S2 I727 but you can enjoy the latest Android 4.2.2 Jelly Bean features any time  on your device through custom ROM like Slim Bean. SlimBean ROM’s are very lightweight, fast and smooth and installation is very simple just like other custom firmware. Team SlimBean recently released the Slim Bean Build 6 which is based on the latest Android 4.2.2 Jelly Bean and is all set for Galaxy S2 I727. The latest build is well optimized and bug fixes than previous build and introduce many new and exiting features. You can check complete features and changes of Slim Bean Build 6 later on this tutorial. So, If you willing to try out fast and compressed custom ROM Slim Bean 4.2.2 Build 6 on your Galaxy S2 I727 then read through this page to know the step-by-step procedure.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

Slim Bean Custom ROM

Slim Bean Build 6 Key Features and Changes:

  • Add DC-HSPA+ to framework
  • Fixed GlowPad layout on Larger devices
  • Massive improvements to T9 dialer
  • TRDS 2.0 [Updated Packages + Gapps]
  • Added Power Dis/Connect Notification sound options
  • Added TruView [Camera]
  • Massive updates to DashClock [Beta2]
  • Fixed Torch FC
  • Added Multi-Part/Split SMS option [Mms]
  • Added Transparent Incoming call [Phone]
  • Added Auto-Brightness sensitivity
  • Changed keyboard hints to full holo blue light [LatinIME]
  • Fixed BT MAP requests
  • More optimizations and fixes for memleaks for Slim changes
  • And some more optimizations to Dalvik!
  • Fixed NFC bugs
  • Fixed TRDS on car dock

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I727. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the smartphone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android smartphones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I727 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 I727 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based Slim Bean Build 6 custom ROM on Galaxy S2 I727.

Pages: 1 2

Update AT&T Galaxy S3 I747 via SlimBean Build 6 Android 4.2.2 Jelly Bean Custom Firmware

AT&T users of Samsung Galaxy S3 SGH-I747 can now update their device with the latest Android 4.2.2 Jelly Bean. However, not from official firmware by the manufacturer but through an after market custom firmware by one of the popular Custom ROM maker SlimBean. Android 4.2.2 Jelly Bean official firmware update for Galaxy S3 I747 is not yet announce but you can enjoy the latest Android 4.2.2 Jelly Bean on your device through custom ROM like Slim Bean. SlimBean ROM’’s are very lightweight, fast and smooth and installation is very simple just like other custom firmware. Team SlimBean recently released the Slim Bean Build 6 which is based on the latest Android 4.2.2 Jelly Bean and is all set for Galaxy S3 I747. The latest build is well optimized and bug fixes than previous build and introduce many new and exiting features. You can check complete features and changes of Slim Bean Build 6 later on this tutorial. So, If you willing to try out fast and compressed custom ROM Slim Bean 4.2.2 Build 6 on your Galaxy S3 I747 then read through this page to know the step-by-step procedure.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

Slim Bean Custom ROM

Slim Bean Build 6 Key Features and Changes:

  • Add DC-HSPA+ to framework
  • Fixed GlowPad layout on Larger devices
  • Massive improvements to T9 dialer
  • TRDS 2.0 [Updated Packages + Gapps]
  • Added Power Dis/Connect Notification sound options
  • Added TruView [Camera]
  • Massive updates to DashClock [Beta2]
  • Fixed Torch FC
  • Added Multi-Part/Split SMS option [Mms]
  • Added Transparent Incoming call [Phone]
  • Added Auto-Brightness sensitivity
  • Changed keyboard hints to full holo blue light [LatinIME]
  • Fixed BT MAP requests
  • More optimizations and fixes for memleaks for Slim changes
  • And some more optimizations to Dalvik!
  • Fixed NFC bugs
  • Fixed TRDS on car dock

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S3 I747. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the smartphone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android smartphones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S3 I747 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S3 I747 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based Slim Bean Build 6 custom ROM on Galaxy S3 I747.

Pages: 1 2

Update At&T Galaxy S2 I777 via Android 4.2.2 AvatarROM Custom Firmware

Update At&T Samsung Galaxy S2 SGH-I777 with the latest Android 4.2.2 Jelly Bean. However not from official firmware but through AvatarROM custom firmware. Android 4.2.2 Jelly Bean based AvatarROM Build 2.12b custom firmware is rolling out and download is available for  Galaxy S2 I777. Official Android 4.2.2 Jelly Bean firmware for Galaxy S2 I777 is yet to come but till then those who want to experience the latest Android 4.2.2 Jelly Bean features on their device can try out AvatarROM Build 2.12b. The team Avatar recently released the AvatarROM Build 2.12b custom ROM which is based on the latest Android 4.2.2 Jelly Bean and is all set for Galaxy S2 I777. The latest build of AvatarROM uses the CyanogenMod as base with combination of MIUI theme, means you’ll have all the features of CyanogenMod with beautiful MIUI themes. So, if you willing to try out the latest Android 4.2.2 Jelly Bean based AvatarROM Build 2.12b ROM on your Galaxy S2 I777 then follow below written guide as it is.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

AvatarROM Custom Firmware

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I777. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I777 Latest USB Drivers

Since you will need to connect your phone to your PC, so you will need to have your Galaxy S2 I777 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based AvatarROM Build 2.12b custom ROM on Galaxy S2 I777.

Pages: 1 2

Android 4.2.2 AvatarROM Build 2.9b Custom Firmware for AT&T Galaxy S2 I727

Android 4.2.2 AvatarROM Build 2.9b Custom Firmware is out and download is available for AT&T Samsung Galaxy S2 SGH-I727 (Skyrocket). The team Avatar recently released the AvatarROM Build 2.9b custom firmware which is based on the latest Android 4.2.2 Jelly Bean and is all set for Galaxy S2 I727. Although this is not an official firmware, you can still install this update if you wish to enjoy the latest Android 4.2.2 Jelly Bean on your Galaxy S2 I727. AvatarROM Build 2.9b uses the CyanogenMod as base with combination of MIUI theme, means you’ll have all the features of CyanogenMod with beautiful MIUI themes. So, if you willing to try out the latest Android 4.2.2 Jelly Bean based AvatarROM Build 2.9b ROM on your Galaxy S2 I727 then follow below written guide as it is.

Before proceeding further, please note this ROM is a custom firmware and still going through development phase. That’s why, there is always a chance for some bugs and issues inside it. However, we believe all known issues will be fixed as development of this ROM progress.

AvatarROM Custom Firmware

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I727. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I727 Latest USB Drivers

Since you will need to connect your phone to your PC, so you will need to have your Galaxy S2 I727 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install Android 4.2.2 Jelly Bean based AvatarROM Build 2.9b custom ROM on Galaxy S2 I727.

Pages: 1 2