Update Galaxy S2 I9100G to ZQLT4 Android 4.1.2 Jelly Bean Official Firmware

ZQLT4 Android 4.1.2 Jelly Bean Official Firmware is now out and available for Samsung Galaxy S2 GT-I9100G Smartphone. Samsung recently rolling out an OTA update about the Firmware for Galaxy S2 I9100G in several countries including China. The official Samsung KIES utility is not available currently to install the firmware on your device. You can go for an OTA update if you received the notification but if you not yet received any OTA notification then follow our simple step by step tutorial to manually update your Galaxy S2 I9100G with the latest ZQLT4 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S2 I9100G because to install this firmware we will use ODIN utility. After installing official firmware ZQLT4 Android 4.1.2 Jelly Bean you can always root your Galaxy S2 I9100G with the help of proper rooting method.

Continue reading this page to install ZQLT4 Android 4.1.2 Jelly Bean official firmware update in Galaxy S2 I9100G using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest ZQLT4 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S2 I9100G to ZQLT4 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy S2 I9100G

Android 4.1.2 Jelly Bean ZQLT4 Firmware Details:

PDA: I9100GZQLT4
CSC: I9100GOZHLT4
Version: 4.1.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I9100G. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I9100G Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 I9100G drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install ZQLT4 Android 4.1.2 Jelly Bean official firmware update on Galaxy S2 I9100G.

Pages: 1 2

Update Galaxy S2 I9100G to DXLS8 Android 4.1.2 Jelly Bean Official Firmware

A new official firmware update is now available for Samsung Galaxy S2 GT-I9100G Smartphone. Samsung recently rolling out the DXLS8 Android 4.1.2 Jelly Bean Firmware for Galaxy S2 I9100G in several countries including- Malaysia. The official Samsung KIES utility is not available to install the firmware update. You can go for an OTA update if you received the notification but if you not yet received any OTA notification then follow our simple step by step tutorial to manually update your Galaxy S2 I9100G with the latest DXLS8 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S2 I9100G because to install this firmware we will use ODIN utility. After installing official firmware DXLS8 Android 4.1.2 Jelly Bean you can always root your Galaxy S2 I9100G with the help of proper rooting method.

Continue reading this page to install DXLS8 Android 4.1.2 Jelly Bean official firmware update in Galaxy S2 I9100G using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest DXLS8 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S2 I9100G to DXLS8 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy S2 I9100G

Android 4.1.2 Jelly Bean DXLS8 Firmware Details:

PDA: I9100GDXLS8
CSC: I9100GOLBLS8
Version: 4.1.2
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I9100G. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I9100G Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 I9100G drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install DXLS8 Android 4.1.2 Jelly Bean official firmware update on Galaxy S2 I9100G.

Pages: 1 2

DDMD1 Android 2.3.6 Gingerbread Official Firmware for Galaxy Y Duos S6102

Update Samsung Galaxy Y Duos GT-S6102 with the new DDMD1 Android 2.3.6 Gingerbread official firmware. Samsung recently rolling out an OTA update about the DDMD1 Android 2.3.6 Gingerbread Official Firmware for Galaxy Y Duos S6102 in several countries including- India, Nepal, Bangladesh, Sri Lanka. The official Samsung KIES utility is not currently available to install this update on your device. You can go for an OTA update if you received the the notification to install the firmware. In case, if official OTA update notification is not yet received to update your Galaxy Y Duos S6102 to DDMD1 Android 2.3.6 Gingerbread firmware then follow our tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Y Duos S6102 because to install this firmware we will use ODIN utility. After installing official firmware DDMD1 Android 2.3.6 Gingerbread you can always root your Galaxy Y Duos S6102 with the help of proper rooting method.

Continue reading this page to install DDMD1 Android 2.3.6 Gingerbread official firmware update in Galaxy Y Duos S6102 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest DDMD1 Android 2.3.6 Gingerbread firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Y Duos S6102 to DDMD1 Android 2.3.6 Gingerbread using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy Y Duos S6102

Android 2.3.6 Gingerbread DDMD1 Firmware Details:

PDA: S6102DDMD1
CSC: S6102ODDMB1
Version: 2.3.6
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Y Duos S6102. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Y Duos S6102 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Y Duos S6102 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install DDMD1 Android 2.3.6 Gingerbread official firmware update on Galaxy Y Duos S6102.

Pages: 1 2

Update XXAMD1 Android 4.1.2 Jelly Bean Official Firmware on Galaxy S2 Plus I9105P

Orange users in Romania those who using Samsung Galaxy S2 Plus GT-I9105P can now  update their device with the new official XXAMD1 Android 4.1.2 Jelly Bean firmware. Many of Galaxy S2 Plus I9105P owners  living in Romania (Orange) already received this firmware update on their phone through OTA. There are two official ways to install the update on your device, one is through OTA update and other is Samsung KIES utility but the KIES is currently not available to install this update. Now, if official OTA update notification is not yet received to update your Galaxy S2 Plus I9105P to XXAMD1 Android 4.1.2 Jelly Bean firmware then follow our tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S2 Plus I9105P because to install this firmware we will use ODIN utility. After installing official firmware XXAMD1 Android 4.1.2 Jelly Bean you can always root your Galaxy S2 Plus I9105P with the help of proper rooting method.

Continue reading this page to install XXAMD1 Android 4.1.2 Jelly Bean official firmware update in Galaxy S2 Plus I9105P using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAMD1 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S2 Plus I9105P to XXAMD1 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy S2 Plus I9105

Android 4.1.2 Jelly Bean XXAMD1 Firmware Details:

PDA: I9105PXXAMD1
CSC: I9105POROAMB4
Version: 4.1.2
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 Plus I9105P. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 Plus I9105P Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 Plus I9105P drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXAMD1 Android 4.1.2 Jelly Bean official firmware update on Galaxy S2 Plus I9105P.

Pages: 1 2

How To Install XXLT6 Android 4.1.2 Jelly Bean Official Firmware on Galaxy Note N7000

Samsung Galaxy Note GT-N7000 received a new Android 4.1.2 Jelly Bean official firmware update recently. Samsung is rolling out an OTA update about the XXLT6 Android 4.1.2 Jelly Bean official firmware Australia. As the official Samsung KIES is not available at this moment to install the update, means only official OTA update have to use to install the firmware on your device. But in case, If you don’t received an OTA update notification yet to update your Galaxy Note N7000 to XXLT6 Android 4.1.2 Jelly Bean firmware then follow our tutorial for a manual update. You can then easily update your Galaxy Note N7000 to XXLT6 Android 4.1.2 Jelly Bean official stock firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Note N7000 because to install this firmware we will use ODIN utility. After installing official firmware XXLT6 Android 4.1.2 Jelly Bean you can always root your Galaxy Note N7000 with the help of proper rooting method.

Continue reading this page to install N7000XXLT6 Android 4.1.2 Jelly Bean official firmware update in Galaxy Note N7000 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXLT6 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Note N7000 to XXLT6 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy-Note-N7000

Android 4.1.2 XXLT6 Firmware Details:

PDA: N7000XXLT6
CSC: N7000XSALS8
Version: 4.1.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Note N7000. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Note N7000 Latest USB Drivers

Since you will need to connect your phone to your PC, so you will need to have your Galaxy Note drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected the your already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install XXLT6 Android 4.1.2 Jelly Bean official firmware update on Galaxy Note N7000.

Pages: 1 2

ZSDME1 Android 4.1.2 Jelly Bean Official Firmware for Galaxy Note 2 N7100

Samsung Galaxy Note 2 GT-N7100 received another  Android 4.1.2 Jelly Bean official firmware update recently. Samsung is rolling out an OTA update about the ZSDME1 Android 4.1.2 Jelly Bean firmware for Galaxy Note 2 N7100. Many of Galaxy Note 2 N7100 users live in the supported countries including Hong Kong already received this firmware update on their device through OTA update. The official Samsung utility KIES is currently unavailable to install the update. Now, if you don’t received any OTA update notification to update your Galaxy Note 2 N7100 To ZSDME1 Android 4.1.2 Jelly Bean firmware then follow our tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Note 2 N7100 because to install this firmware we will use ODIN utility. After installing official firmware ZSDME1 Android 4.1.2 Jelly Bean you can always root your Galaxy Note 2 N7100 with the help of proper rooting method.

Continue reading this page to install ZSDME1 Android 4.1.2 Jelly Bean official firmware update in Galaxy Note 2 N7100 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest ZSDME1 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Note 2 N7100 to ZSDME1 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

samsung galaxy note 2 n7100

Android 4.1.2 Jelly Bean ZSDME1 Firmware Details:

PDA: N7100ZSDME1
CSC: N7100OZSDME1
Version: 4.1.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Note 2 N7100. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Note 2 N7100 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Note 2 N7100 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install ZSDME1 Android 4.1.2 Jelly Bean official firmware update on Galaxy Note 2 N7100.

Pages: 1 2

Update Galaxy S3 Mini I8190L via UBAMD1 Android 4.1.2 Jelly Bean Official Firmware

Want to update your Samsung Galaxy S3 Mini GT-I8190L with the latest available official Android 4.1.2 Jelly Bean firmware? Then you are on the right place, here you can download and install the UBAMD1 Android 4.1.2 Jelly Bean Official Firmware for your Galaxy S3 Mini I8190L. Samsung recently rolling out an OTA update about the UBAMD1 Android 4.1.2 Jelly Bean Firmware for Galaxy S3 Mini I8190L in several countries including Mexico. The official Samsung Kies utility is available to install the firmware, so connect your phone to PC and download the firmware through KIES. You can also go for an OTA update if you received the notification. However, in case  KIES is not working for any reason or OTA notification not yet received by you, then you can follow  our simple manual process to update your Galaxy S3 Mini I8190L with the latest UBAMD1 Android 4.1.2 Jelly Bean official firmware. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S3 Mini I8190L because to install this firmware we will use ODIN utility. After installing official firmware UBAMD1 Android 4.1.2 Jelly Bean you can always root your Galaxy S3 Mini I8190L with the help of proper rooting method.

Continue reading this page to install UBAMD1 Android 4.1.2 Jelly Bean official firmware update in Galaxy S3 Mini I8190L using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest UBAMD1 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S3 Mini I8190L to UBAMD1 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy S3 Mini I8190L

Android 4.1.2 Jelly Bean UBAMD1 Firmware Details:

PDA: I8190LUBAMD1
CSC: I8190LUVYAME3
Version: 4.1.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S3 Mini I8190L. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S3 Mini I8190L Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S3 Mini I8190L drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install UBAMD1 Android 4.1.2 Jelly Bean official firmware update on Galaxy S3 Mini I8190L.

Pages: 1 2

Android 4.1.2 Jelly Bean Official Firmware DXLSD for Galaxy S2 I9100

Samsung Galaxy S2 GT-I9100 received another official firmware update recently. You can now update your device with the DXLSD Android 4.1.2 Jelly Bean official firmware. Samsung recently rolling out an OTA update about the DXLSD Android 4.1.2 Jelly Bean Official Firmware for Galaxy S2 I9100 in several countries including- Malaysia, Indonesia, Vietnam, Singapore. The official Samsung KIES utility is not available at this time to install this update on your device. You can go for an OTA update to install the firmware if you received the notification. In case, if official OTA update notification is not yet received to update your Galaxy S2 I9100 to DXLSD Android 4.1.2 Jelly Bean firmware then follow our tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S2 I9100 because to install this firmware we will use ODIN utility. After installing official firmware DXLSD Android 4.1.2 Jelly Bean you can always root your Galaxy S2 I9100 with the help of proper rooting method.

Continue reading this page to install DXLSD Android 4.1.2 Jelly Bean official firmware update in Galaxy S2 I9100 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest DXLSD Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S2 I9100 to DXLSD Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy S2 I9100

Android 4.1.2 Jelly Bean DXLSD Firmware Details:

PDA: I9100DXLSD
CSC: I9100OLBLSD
Version: 4.1.2
Date: April, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S2 I9100. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S2 I9100 Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S2 I9100 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install DXLSD Android 4.1.2 Jelly Bean official firmware update on Galaxy S2 I9100.

Pages: 1 2

Install VLUAMDJ Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 M919V (Canada)

If you are living in Canada, you can now update your Samsung Galaxy S4 SGH-M919V with the VLUAMDJ Android 4.2.2 Jelly Bean Official Firmware. Samsung recently rolled out the VLUAMDJ Android 4.2.2 Jelly Bean official firmware update for Galaxy S4 M919V Canada. The official Samsung KIES utility is currently not available to install the update on your device. You can go for an OTA update to install this latest firmware if you received the update notification. In case, if official OTA update notification is not yet received by you to update your Galaxy S4 M919V to VLUAMDJ Android 4.2.2 Jelly Bean firmware then follow our simple tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy S4 M919V because to install this firmware we will use ODIN utility. After installing official firmware VLUAMDJ Android 4.2.2 Jelly Bean you can always root your Galaxy S4 M919V with the help of proper rooting method.

Continue reading this page to install VLUAMDJ Android 4.2.2 Jelly Bean official firmware update in Galaxy S4 M919V using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest VLUAMDJ Android 4.2.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy S4 M919V to VLUAMDJ Android 4.2.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Samsung Galaxy S4 GT-I9500

Android 4.2.2 Jelly Bean VLUAMDJ Firmware Details:

PDA: M919VVLUAMDJ
CSC: M919VYVLAMDJ
Version: 4.2.2
Date: May, 2013

Warning!

We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S4 M919V. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy S4 M919V Latest USB Drivers

Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy S4 M919V drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install VLUAMDJ Android 4.2.2 Jelly Bean official firmware update on Galaxy S4 M919V.

Pages: 1 2