DXMD3 Android 4.1.2 Jelly Bean Official Firmware for Galaxy Tab 7.7 P6800


After a long wait, Samsung started pushing Jelly Bean updates to Galaxy Tab 7.7. Samsung Galaxy Tab 7.7 GT-P6800 received the DXMD3 Android 4.1.2 Jelly Bean official firmware update recently. Many of Galaxy Tab 7.7 P6800 users living in the supported countries including- Singapore, Indonesia, Thailand, Vietnam, Malaysia already received the update through OTA notification. You can use the official Samsung KIES Utility to install the update.  However, if OTA notification is not received yet or KIES is not allowing you to update your Galaxy Tab 7.7 P6800 to DXMD3 Android 4.1.2 Jelly Bean firmware then follow our tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Tab 7.7 P6800 because to install this firmware we will use ODIN utility. After installing official firmware DXMD3 Android 4.1.2 Jelly Bean you can always root your Galaxy Tab 7.7 P6800 with the help of proper rooting method.

Continue reading this page to install DXMD3 Android 4.1.2 Jelly Bean official firmware update in Galaxy Tab 7.7 P6800 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest DXMD3 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Tab 7.7 P6800 to DXMD3 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.

Galaxy Tab 7.7 P6800

Android 4.1.2 Jelly Bean DXMD3 Firmware Details:

Version: 4.1.2
Date: April, 2013


We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Tab 7.7 P6800. Don’t try this guide in any other Android device. It may hard brick your device.

Pre Requisites:

As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

  1. Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
  2. If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea  to check battery percentage before following this tutorial. Usually, the tablet should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android tablets.
  3. USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
  4. Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.

Download Galaxy Tab 7.7 P6800 Latest USB Drivers

Since you will need to connect your tablet to your PC, so you will need to have your Galaxy Tab 7.7 P6800 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.

So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install DXMD3 Android 4.1.2 Jelly Bean official firmware update on Galaxy Tab 7.7 P6800.

Pages: 1 2